Thin-wall packaging is one of the most demanding fields in the injection molding industry in terms of speed. Lunch boxes, milk tea cups, thin-wall containers—walls are getting thinner, cavity numbers are increasing, and molding cycles are getting shorter. Every speed increase represents a comprehensive test of the injection system, clamping structure, and overall rigidity of the injection molding machine.
Lisong’s thin-wall packaging high-speed injection molding machine has completed a new round of upgrades. Injection speed has been comprehensively increased by 30%, reaching a maximum of 650 mm/s. Behind this number is a complete set of technical upgrades built around high-speed precision.

650 mm/s Injection Speed: Filling Completed in an Instant
The core difficulty of thin-wall products lies in filling. The thinner the wall, the greater the flow resistance of the melt in the cavity and the faster the cooling speed. If the injection speed is insufficient, the melt cools and solidifies before filling the cavity, resulting in short shots and incomplete filling.
After a 30% increase in injection speed, the maximum injection speed of Lisong’s thin-wall packaging high-speed machine reaches 650 mm/s. The melt completes filling in an extremely short time, filling the entire cavity before cooling. For multi-cavity thin-wall molds, this means every cavity receives sufficient melt, and product weight and wall thickness consistency are significantly improved.
The increase in injection speed is not a single parameter adjustment. It requires simultaneous upgrades in screw plasticizing capacity, injection unit response speed, servo drive power, and control system algorithms. Lisong has specially optimized the screw structure to ensure uniform melt temperature and stable viscosity at high injection speeds. The injection unit has been reinforced to maintain rigidity during high-speed reciprocation. The servo drive system provides sufficient acceleration capability so that injection speed commands are executed immediately.
Enlarged and Thickened Tie Bars and Platens: Comprehensive Enhancement of Clamping Rigidity
The higher the injection speed, the greater the impact on the mold during injection. If clamping rigidity is insufficient, the platens will produce slight displacement under high-pressure filling, causing flash, uneven wall thickness, and even mold damage.
In this upgrade, Lisong has comprehensively enlarged and thickened the tie bars and platens. A larger tie bar cross-sectional area provides higher tensile strength, and thicker platens provide stronger resistance to deformation. Clamping rigidity is greatly improved, and the machine remains stable even under 650 mm/s high-speed injection. The platens do not deform, the mold parting surface fits tightly, and product precision is fundamentally guaranteed.
Mechanical Direct-Pressure Clamping: Unity of Stability and Precision
Lisong’s thin-wall packaging high-speed machine adopts a mechanical direct-pressure clamping structure. Unlike traditional toggle-type clamping, mechanical direct-pressure eliminates the toggle linkage, hinge pins, and bronze bushes, relying on a large-diameter cylinder to directly drive the platen. The force transmission path is shorter and more direct, and the clamping force distribution is more uniform. There is no hinge pin wear, the clamping force does not decay, and the machine maintains factory precision even after millions of mold opening and closing cycles. The application of low-friction linear guide rails further reduces motion resistance, making mold opening and closing smooth and precise.
Electric Storage as Standard: Faster and More Economical
Electric storage as standard across the series is a consistent configuration of Lisong’s high-speed machines. Servo motors directly drive the storage action, with fast response and short storage time. The injection screw returns to the ready-to-inject position more quickly, further compressing the overall cycle. At the same time, servo motors do work on demand, with energy consumption far lower than hydraulic storage. In thin-wall packaging, a scenario of high cycle rates and continuous production, the energy-saving advantages of electric storage accumulate over time and become a considerable cost saving.
More Power Saving, More Energy Efficient: The System Advantages of All-Electric Drive
Lisong’s thin-wall packaging high-speed injection molding machine is fully electrified in its drive system. Core actions such as clamping, injection, storage, and mold opening and closing are all driven by servo motors. Without the throttling losses and standby energy consumption of hydraulic systems, the overall energy consumption is greatly reduced compared to traditional hydraulic machines. For thin-wall packaging factories running 24 hours continuously, this means the electricity saved each year can cover a considerable portion of the equipment investment.

Everything for High-Speed Precision
650 mm/s injection speed, enlarged and thickened tie bars and platens, mechanical direct-pressure clamping, electric storage as standard, all-electric drive energy savings—every upgrade of Lisong’s thin-wall packaging high-speed injection molding machine points to the same goal: stably producing higher-precision products in shorter cycles.
Competition in the thin-wall packaging market is essentially a dual competition of efficiency and quality. With this upgrade, Lisong provides thin-wall packaging manufacturers with a solution that balances speed, precision, and cost. High speed is not the endpoint. The stability and precision beneath high speed are the true value Lisong delivers to its customers.