The high-speed precision injection molding machine produced by Ningbo Lisong injection molding technology Co., Ltd.
is positioned at the high end and has the characteristics of high speed, high efficiency, high precision and high energy saving.
Precise Special Packaging Injection Molding Machine
Operating side
1
Clamping Unit Using mechanical direct pressure mold clamping with uniform and stable mold clamping force transmission and a larger mold opening stroke which is more suitable for in-mold automation.LISONG the 5th generation G series IMM adopts thicker platen with high rigidity.Less elastic deformation loner forming and clamping fore,and effective protection of the mold.Standard high-speed serve proportional vale for mold opening and closing with fast mold opening response,accurate positioning and short cycle time.
2
KEBA advanced control interface 1.High-speed micro-processing continuous action mode scan cycle can reach within 1ms
2. Ergonomic layout 3. Direct menu key access
3.Data image monitoring
4.With injection speed and pressure control curve tracking function. Self-diagnosis and fault detection.
3
Precision injection molding 1.The injection table support adopts high-precision dual linear guides, with low friction coefficient, uniform injection and plasticization resistance, faster injection speed, and suitable for precise injection molding.
2.The medium-inertia non-rotating single-cylinder injection molding mechanism has a compact structure, fast injection starting speed, high repeatability, and a maximum injection rate of 1000mm/s.
4
Precise temperature control 1.Standard infrared nano heating ring, fast heating, good thermal insulation performance, power saving over 30%, closed-loop PID temperature control, accurate temperature control, excellent process control stability.2.Adopt large L/D ratio, low shear, high mixing optimized screw, good mixing effect and good plasticizing efficiency.
5 It is equipped with built-in multi-group servo oil-circuit power and control system as standard,The oil pump runs at a constant temperature in the oil tank for a long time,the oil pump has a longer life and lower machine noise,It can be realized mold opening and closing to synchronous melt glue,and also be realized synchronous ejection or core pulling.When oopening and closing molds minimizing moulding cycle and improving productiion efficiency.Unique modular design which can be disassembled and repaired on the obverse sede.
6
Frame Structure 1. High rigidity design, tempering, surface spray treatment.
2. Enlarge the blanking port to adapt to the direct falling off and picking of products.
Clamping Unit
KEBA advanced control interface
Precision injection molding
Precise temperature control
Frame Structure
