The high-speed precision injection molding machine produced by Ningbo Lisong injection molding technology Co., Ltd.
is positioned at the high end and has the characteristics of high speed, high efficiency, high precision and high energy saving.
Using mechanical direct pressure mold clamping with uniform and stable mold clamping force transmission and a larger mold opening stroke which is more suitable for in-mold automation.LISONG the 5th generation G series IMM adopts thicker platen with high rigidity.Less elastic deformation loner forming and clamping fore,and effective protection of the mold.Standard high-speed serve proportional vale for mold opening and closing with fast mold opening response,accurate positioning and short cycle time.
KEBA advanced control interface High-speed microprocessor continuous operation mode scan up to 1 ms.Ergonomic layout.Direct menu key access.Data image monitoring.With injection speed and pressure control curve tracking function capable of self-diagnosis and fault detection.
Precision injection molding The injection table support adopts high-precision double linear guides,with low friction coefficient small and uniform injection and plasticization resistance,faster injection speed,and suitable for precision injection molding.The medium-inertia non-rotating,single-cylinder injection molding mechanism has a compact structure,fast injection starting speed,high repeat accuracy and a maximum shooting speed of 1000mm/s.
Precise temperature control 1.Standard infrared nano heating ring, fast heating, good thermal insulation performance, power saving over 30%, closed-loop PID temperature control, accurate temperature control, excellent process control stability.2. Adopt large L/D ratio, low shear, high mixing optimized screw, good mixing effect and good plasticizing efficiency.
5 It is equipped with built-in multi-group servo oil-circuit power and control system as standard,The oil pump runs at a constant temperature in the oil tank for a long time,the oil pump has a longer life and lower machine noise,It can be realized mold opening and closing to synchronous melt glue,and also be realized synchronous ejection or core pulling.When oopening and closing molds minimizing moulding cycle and improving productiion efficiency.Unique modular design which can be disassembled and repaired on the obverse sede.
Frame Structure 1. High rigidity design, tempering, surface spray treatment.
2. Enlarge the blanking port to adapt to the direct falling off and picking of products.